Home > Dry Type Transformer >

Coherent Unencapsulated Coil SGB13 400V Dry Power Transformer

Product Categories

Knkong Electric Co.,Ltd

Contact Now

Coherent Unencapsulated Coil SGB13 400V Dry Power Transformer

Ask Lasest Price
Brand Name :	KNKONG
Model Number :	SGB
Certification :	ISO IEC GB
Price :	USD 1000-2000 Each
Payment Terms :	L/C, T/T, Western Union
Supply Ability :	1000 Unit per month
Delivery Time :	15 working days

Add to Cart

Product Details
Company Profile

Coherent Unencapsulated Coil SGB13 400V Dry Power Transformer

SGB13 Three-phase coherent unencapsulated coil dry power transformer 10/0.4kv 100-2500KVA

SGB13 10/0.4kv Dry Type Power Transformer

Capacity:100~2500KVA
High voltage:6-11kv
Low voltage:0~400v

Inquire

Product Introduction

SGB13 dry-type power transformer product features Low loss: the no-load loss of the product is reduced by more than 20% compared with the SCB11 product, with excellent energy-saving effect, economical operation, and maintenance-free. Low noise: The noise level of the product is more than 10-15 decibels lower than the current professional standard JB/T10088-1999 "6-220KV transformer sound level". Low partial discharge: The resin mixture adopts advanced mixing methods and vacuum film degassing technologies to make the mixture uniform and eliminate bubbles in the mixture. The product has only very low partial discharge, which can be controlled below 5PC.

Characteristics

High mechanical strength: The resin with filler makes the expansion coefficient difference in the casting body small, the curing shrinkage rate is small, the internal stress is small, and the hardness of the cured product is high. In the epoxy resin encapsulation layer of the inner and outer surfaces of the high and low voltage coils, there are The prefabricated reinforcing material has a dense structure like reinforced concrete, so the mechanical strength is greater than that of pure epoxy resin, and it can withstand the sudden short-circuit electromotive force without damage.

Working environment

1. Ambient temperature: -10° C~+40°C

2. Altitude: <1000m

3. Relative humidity: <90%

4. The installation site should be no gas, steam, chemical deposition, dust, or dirt that will affect transformers' insulation seriously, also explosive or corrosive medium is not 1llowed.

5. If any special working conditions are not in line with the above stipulations, the user shall negotiate with us."

Product Tags:


*From:	Your email address is incorrect!
*To:	Knkong Electric Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!